Civil Engineering

Permanent URI for this collectionhttp://197.211.34.35:4000/handle/123456789/74

Civil Engineering

Browse

Author: search.filters.author.Abubakar, M.

Search Results

Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    A Comparative Analysis of Grillage Method and Beam line Analysis of a Reinforced Concrete Waffle Brifge Deck
    (Nigeria Journal of Engineering and Applied Sciences (NJEAS), 2022-01-23) Adamu, H. N.; Abbas, B. A.; Abubakar, M.; Yusuf, A.; Kolo, D. N.; Shehu, M.
    The analysis of reinforced concrete waffle bridge deck using Chanchaga bridge as a case study was carried out with the aid of computer program written in MATLAB. The bridge deck which is a beam bridge was idealized to be a waffle slab. A mathematical model of the bridge was developed using the method of grillages because very complex shapes of problem domain with prescribed conditions can be handled easily using the method. The bridge deck was modelled as interconnection of grid elements. The analysis was carried out using direct stiffness matrix method. The nodal displacements and the resulting static internal forces; shear forces, bending moments and twisting moments of each grid element were determined using the matrix. The results obtained using the method of grillages were then compared with beam line analysis and the former method gave a 10% decrease in forces which will result in the reduction of overall design and materials by 10%.
  • No Thumbnail Available
    Item
    Effectiveness of Locust Bean Epicarp Extract on Re-vibrated Concrete Using Pebbles from Bida Environs as Coarse Aggregate
    (Proceedings of the Sustainable Education and Development Research Conference, University of Environment and Sustainable Development, Somanya, Ghana, 2023-01-02) Abbas, B. A.; Mohammed, T. A.; Yusuf, A.; Kolo, D. N.; Abubakar, M.; Abdullahi, A.
  • No Thumbnail Available
    Item
    Structural Reliability Studies of Reinforced Concrete Beam subjected to Shearing forces with Natural Stone as Coarse Aggregate
    (USEP: Journal of Research Information in Civil Engineering, 2019-02-12) Kolo, D. N.,; Aguwa, J. I.,; Tsado, T. Y.,; Abdullahi, M.,; Yakubu, D. M.,; Abubakar, M.
    This paper presents experimental and structural reliability studies performed on Bida natural stones (BNS) used as coarse aggregate in concrete production. Construction activities based on these naturally occurring materials are major steps towards industrialisation and economic integration of developing countries like Nigeria. This explains the huge interest over the years in utilising such materials as substitute or partial replacement for concrete constituents. The method adopted to appraise the aim and objectives of the study was laboratory experimentation. A total of 80 concrete cubes of 150 mm × 150mm × 150 mm were cast and used for this study. First order reliability method (FORM) was employed to ascertain the level of safety of the beam. Sensitivity analysis was further conducted by varying the span, effective depth and area of shear reinforcement of the beam in shear. The result revealed that the reinforced concrete beam utilising Bida natural stones is structurally safe at a span of 3000 mm and 3250 mm for unwashed and washed Bida natural stones respectively with probabilities of failure of 1.07 × 10-3 and 1.14 × 10-3. Both unwashed and washed Bida natural stones were structurally safe at effective depth of 439 mm with probabilities of failure of 5.87 × 10-3 and 1.31 × 10-3in shear.