School of Infrastructure Process Engineering and Technology (SIPET)

Permanent URI for this communityhttp://197.211.34.35:4000/handle/123456789/46

School of Infrastructure Process Engineering and Technology (SIPET)

Browse

Author: search.filters.author.Abdullahi, M.

Search Results

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Effects of Waste Glass Powder and Cassava Peel Ash on Compressive Strength of Concrete
    (Proceedings of the Third International Civil Engineering Conference (ICEC, 2024), 2025) Ndaiji, A. U.; Abdullahi, M.; Abbas, B. A.; Abubakar, Mahmud
    This study investigates the effects of incorporating glass waste powder (GWP) and cassava peel ash (CPA) as partial replacements for cement on the compressive strength of concrete. A total of 294 concrete cubes were prepared with varying proportions of GWP and CPA (0%, 5%, 10%, 15%, 20%, 25% and 30% replacement levels). Both materials were characterized by X-Ray Fluorescence (XRF) analytical method. The slump of fresh concrete with WGP and CPA of 0, 5, 10, 15, 20, 25 and 30% respectively by weight of cement was investigated in accordance with standard procedures. The results show that the compressive strength of concrete increased with the addition of GWP and CPA up to a certain replacement level. The 28 days compressive strength of concrete with 15% WGP/CPA content was 16.4 % more than normal, while that of concrete with 20% WGP/CPA content was 11.9 % less than normal. The optimal replacement levels for GWP and CPA were found to be 15% and 5%, respectively. The study concludes that the use of GWP and CPA as partial replacements for cement can improve it compressive strength, it sustainability and reduce the environmental impact of concrete production. The results of slump tests of different percentages of CPA/GWP as a partial replacement of cement in concrete production were observed for all proportion ranging between 12 – 41mm. However, 20% GWP/CPA replacement was considered as optimum for structural concrete.
  • No Thumbnail Available
    Item
    Reliability studies on reinforced concrete beam subjected to bending forces with natural stone as coarse aggregate
    (Asian Journal of Civil Engineering, 2020-01-12) Kolo, D. N.; Aguwa, J. I.; Tsado, T. Y.; Abdullahi, M.; Yusuf, A.; Oritola, S. F.
    This paper presents the results of structural reliability analysis of a structural element (beam) in building using First-order reliability method (FORM) to ascertain the level of safety. The natural stone (NS) which is the by-product of Precambrian deposits of the Bida trough was used as coarse aggregate: unwashed and washed aggregates were used. A total of 80 concrete cubes of 150 mm × 150 mm × 150 mm were cast and used for this study, sensitivity analysis was conducted by varying the span, depth, effective depth, area of shear reinforcement and dead load of the beam in bending. The result of the sensitivity analysis revealed that the beam utilising unwashed and washed NS are both structurally safe at a span of 3000 mm with probabilities of failure of 9.20 × 10–5 and 2.06 × 10–8 and both safe at a depth of 600 mm with probabilities of failure of 4.19 × 10–4 and 2.602 × 10–4, respectively, in bending.